The PCScope is a fully functional PC based digital oscilloscope using sound card. It offers a large viewing area along with easy to use controls. The controls can be aligned to top, bottom, right or left of the window for ease of use.

Features

Dual channels use stereo inputs of the sound card. View any number of channels simultaneously from CH1, CH2, CH1+CH2, CH1-CH2 and CHxCH2. Independent manual or auto control of vertical gain, offset and position of each channel. Horizontal scale and offset allow for zoom-in of the acquired data in auto or manual mode. Free running (Auto) and triggered (Normal) modes. Edge trigger on rising, falling or both edges. Trigger source channel can be either CH1 or CH2. Adjustable trigger position from 0% to 100% lets you view pre-trigger and post-trigger data.
Selectable record length (Number of samples per acquisition) from 10 to 1M. Selectable sample rate upto 192 KSPS. Dual manual horizontal cursors with delta. Dual automatic or manual vertical cursors with delta. Single, Run/Stop, number of acquisitions and time duration acquisition modes. Setup save and recall. Waveform save in ascii format. Controls can be aligned to top, bottom, right or left of the window for ease of use. Can be interfaced to other DspSee modules. This allows automated measurements or digital signal processing of the acquired signals. Free for non-commercial purposes. Download now